Power Connections

The NX-P is rated 100-240V 50/60Hz, operates over 90-264V 50/60Hz. Do not connect it to power outside this range.

The provided Tru-One cable is not fitted with a country-specific plug.

Please install a plug that meets local and national electric codes and is suitable for the country's specific power outlet types.

A 3-prong grounding-type plug must be installed following the plug manufacturer’s instructions. The table below shows some possible pin identification schemes; if the pins are not clearly identified, or if you have any doubts about proper installation, consult a qualified electrician.

A cable with a NEMA 15-5P plug is provided for use of the NX-P in the US and Canada. The approved cable must be used in North America.

Wire Color (Standard EU Code)	Pin	Symbol
Brown	Live	L
Blue	Neutral	N
Yellow/Green	Ground

1. Check the Power Switch and ensure that is set to the OFF position.
2. Insert the provided power cable into the MAINS IN connector and connect the cable to a properly protected and grounded power outlet.
3. Turn on the NX-P by toggling the power switch to ON.