Copying and Moving Groups

To Move or Copy an Individual Group

To move an individual group, you can use the Move button using the following syntax:

Move Group xx @ yy Enter

Alternatively, you can press the Move button, then press the desired group on the touch screen and then press its new location.

If you wish to copy a group, use the Copy button and the following command line syntax:

Copy Group xx @ yy Enter

Or you can press the Copy button, then press the desired group on the touch screen and then press the location for the copy. By default, the copy will have the same name as the original.

To Move or Copy a Range of Groups

It is also possible to move or copy a number of different groups simultaneously. You cannot use the touch screen for this operation; you must use the keypad. The following is an example of the syntax utilized in this command:

Move Group 1 Thru 4 @ 20 Enter

The following screen is the result of that move:

Note that the Dartz 360 Group, formerly group 4 has moved to group 23 and the previous 3 groups have all moved together as well.

In the event that one or more of the groups to be moved lands on an already recorded group, a pop up window will appear offering five options. For this example, we will be using group 20 thru 23 (the ones we just moved from 1-4) again with the following syntax - Move Group 20 Thru 23 @ 10 Enter. This will present the following popup:

 

We are presented with 4 options:

Swap Groups - Choosing Swap Groups will simply tell the console to swap the groups around. In this example the following syntax was used again-Move Group 20 Thru 23 @ 10 Enter. When you press Swap Groups, the Groups that were in 20-23 are now in 10-13, and the Groups that were in 10-13 are now in 20-23.

Replace - Choosing Replace, ONYX will replace Groups 10 thru 13 with Groups 20 thru 23.

Edit Command - Brings the command line back into focus, and allows you to change the command.

Cancel Command- Cancel is similar to abort, except the entire command would be ignored. The entire action, whether or not there is an empty group in the target range is canceled. Note - If all of the target groups are empty, no options will appear. Move and Copy commands cannot be undone.

When using the Copy Command with a range of groups, the syntax remains the same as when using Move. The only difference is there is no Swap function.