Flash Timings
In the flash timings tab of the cuelist options, ONYX allows you to set a flash timing that you can then assign to a flash button to make your LED's look a little less harsh when flashing!
To set this up, you first want to go to Function Assignments inside of the Cuelist Options window. This is a very important step!
At the end of the "row" that your flash button is on (configurable to any of the buttons), you'll see a column labeled "Timed", and you can click on the and change it to .
Now, head over to the tab. This is where you can set and customize the actual timing of the flash:
| Control | Description |
|---|---|
| Attack | This sets the amount of time that the flash button will use to bring the cue up. |
| Hold | This sets the amount of time that the flash button will hold at full. You can move this control all the way to the right for "Infinite Hold" which allows you to take your finger off the flash button, and the cue will stay at full until you press the flash button again. |
| Decay | Opposite of attack, this is the amount of time that the flash button will fade out the cue in. |